Face Mask Treatment

By: TOM BRANNA

Editor

Ingredients

%

Phase A

Deionized water
61.90

Dissolvine 220-S (Coast Southwest, Akzo Nobel Functional Chemicals LLC) (Tetrasodium EDTA)
0.20

Sorbitol 70% (Sorbitol)
8.00

GlyAcid 70 HP (Coast Southwest, CrossChem LP) (Glycolic acid)
1.40

Phase B

Ultrastarch P21C (Coast Southwest, Ultra Chemical, Inc.) (Zea mays (corn) starch)
10.00

Pelavie Pink Clay (Coast Southwest ) (Bentonite)
10.00

Phase C

Hydrasoft Sea (Coast Southwest) (Water (and) algae extract (and) natto gum (and) phenoxyethanol (and) chlorphenesin (and) citric acid)
4.00

Creagel Crystal HPB (Coast Southwest) (Hydrogenated polyisobutene (and) ethylene/propylene copolymer)
1.00

Phase D

Sharomix 705 (Coast Southwest, Sharon-Laboratories Ltd.) (Benzoic acid (and) sorbic acid (and) dehydroacetic acid (and) benzyl alcohol
1.00

Phase E

Endicare ETP-305 (Coast Southwest) (Polyacrylamide (and) C13-14 isoparaffin (and) laureth-7)
2.50

Procedure

Phase A – In main vessel, add phase A, mix and heat to 50°C and hold. Phase B – In side vessel, combine phase B and then slowly add phase B to phase A. Increase speed as needed so powder is wetted out and dispersed; batch will thicken. Phase C – In side vessel, blend phase C together, then add to Phase AB. Once uniform, begin cooling to 40-45°C with slow prop or sweep. Phase D – At 40-45°C, add phase D to phase ABC, continue cooling to 25-30C. Phase E – Add phase E to phase ABCD. Initially, the batch will be discontinuous. Continue mixing and the batch will become uniform. Stop when the batch is thick and homogenous.